How-To Guide

FAQ
The power indicator light of microphone is not on
Make sure the battery is not low, otherwise, please
charge in time.
Microphone is no sound
1. Check if the microphone is turned on and its LED
indicator is solid blue;
2. Make sure that the mixer receiver has been correctly
inserted into the interface of TV;
3. If the mixer indicator light is not on, you can follow the
ocial account to view the pairing process and try.
Speaker is no sound
·If the mixer indicator light is on, please try to adjust the
volume knob of the mixer to increase the volume,
·If the mixer indicator light is not on, please check if the
TV connected correctly or not, and then try to connect
the TV and the mixer via 3.5mm audio cable or coaxial
line (coaxial line is not standard accessories, you need to
buy it locally).
For more questions pls contact your dealer or
follow the official account to leave message.
How to Install
2. Connect the Speaker
According to the speaker interface, please connect the
mixer to speaker by 3.5mm to 2-Male RCA Cable or by
3.5mm audio cable, and power on the speaker.
1. Connect the Mixer Device
Please connect the
Mixer to the Smart TV
by Type-C cable
Connect with TV
or
Please connect the Mixer to
the power adaptor by
Type-C cable,then mobile
devices connected to the
mixer via Bluetooth
Mobile Devices
3. Start to use
Press the power button on microphone and open the
karaoke app start to sing.
NOTICE: The cable accessories that X2 equipped
is suitable for the majority of market speakers, if
your speaker can’t fit the cables, please buy the
extra cables according to your speaker.
Scan the QR code to get
the connection video.
Packing list
Mixer Receiver ×1
Type-C Date Cable ×1
Wireless Microphone × 2 Manual ×1
Manual
3.5mm to 2-Male RCA Cable ×1
Microphone Description
Microphone Indicator Light Description
Solid Blue
Quick Flashing Blue
Solid Red
Quick Flashing Green
Microphone normal working mode
Microphone in pairing mode
Low power on microphone
Microphone under charging
Solid Green Microphone is fully charged
Volume +/-
Mode Switch
Power on/off
Indicator light
Charging interface
Mixer Receiver Description
3.5mm
Audio Output
3.5mm
Audio Input
Coaxial InputType-C Power
Supply & Input
Type C SPDIF IN
21
Mixer Indicator Light Description
Solid White
Quick Flashing White
Slow Flashing White
Normal working mode
Pairing mode
Microphone not paired
1
Volume Adjusting
Adjust the volume of Music
Adjust the volume of Echo
2
Echo Adjusting
3
Mode Switch
Switch the audio input source from
Bluetooth / 3.5mm audio/coaxial
4
3 4
SPEAKER
MIXER
TV
Connect with TV
Type C SPDIF IN
Connect with Mobile Devices
MOBILE DEVICES
or
SPEAKER
MIXER
Type C SPDIF IN
Notice
1. Please keep the product away from high-temperature
and damp places so as to avoid any breakdown.
2. It is recommended to charge in time in the event that
the product is not in use for a long time so as not to
compromise the service life of battery.
3. The product has been paired before delivery for direct
use. Please DO NOT pair unless it is necessary, otherwise,
the product may not function properly.
4. If the LED indicator on the microphone pulses red,
please replace batteries in time.
Shanghai Loostone Information
Technology Co., Ltd
SJTU Park
Songjiang District, Shanghai
www.loostone.com
After-sales service
Non-warranty regulations
The PUREMIC Karaoke wireless microphone made by
Shanghai Loostone Information Technology Co., Ltd
strictly abides by Law of the People's Republic of China
on Protection of Consumer Rights and Interests and
Product Quality Law of the People's Republic of China to
1. The unauthorized maintenance, misuse, bumping,
negligence, abuse, liquid inlet, modication, improper
use of products and accessories;
2. Out of warranty period;
3. Damage caused by force majeure;
4. Damage caused by human factors.
Specication
Name and content of hazardous
substances in the product
Hazardous substances
Part name
Receiver
Microphone
Battery
Connection line
Pb
×
×
×
×
Hg
○
○
○
○
○
○
○
○
Cd
○
○
○
○
Cr+6
○
○
○
○
PBB
○
○
○
○
PBDE
It signies that the content for such hazardous substance
in all the homogeneous material of the part is lower than
the limit stipulated in GB/T26572.
Note: The environmental design concept of the product has been
brought the hazardous substances under control effectively. “×”It
means that the hazardous substances cannot be replaced for now
restricted by the technical development level.
The identication duration (ten years) indicates that
the hazardous substances inside the electronic and
electrical products will not leak or mutate under
normal service conditions. It is a duration that will
not cause severe pollution to the environment or
serious damage to people and their property for the
use of such products.
The form is prepared according to the stipulation of
SJ/T 11364
：
○
It means that the content for such hazardous substance in
at least one of the homogeneous material of the part
exceeds the limit stipulated in GB/T26572.
：×
Environmental protection service life
QUICK GUIDE X2 From Shanghai Loostone Information Technology Co.,Ltd
AUX OUT AUX IN
扫描后换英文版视频
FCC Statement
AUX INAUX OUT AUX INAUX OUT
Facebook:Puremic Home Karaoke
Instagram:Puremic Home Karaoke
AUX Cable x1
or
or
Puremic Karaoke Mixer Set X2
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment o
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
receiver.
-Connect the equipment into an outlet on a circuit
dierent from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV
technician for help.
Changes or modications not expressly approved by the
party responsible for compliance could void the user's
authority to operate the equipment.
FCC ID: 2A7ZR-PWMAZ-Q2 (Microphone)
FCC ID: 2A7ZR-X2 (Mixer Receiver)
Working voltage
Battery capacity
Working current
The input pecifications
Pick up way
Directivity
Sensitivity
Output impedance
Signal /Noise ratio
Frequency response
Transmission power
communication
ProductsSize
3.5~4.2V
2000mAh polymer lithium battery
68mA
5V 1A
Moving coil
Heart shape
-52dB±3dB
600Ω
≥75dB
50Hz～14KHz
12dBm
10m
173mm×φ38.8mm
（open and barrier-free environment）
Voltage
Current
Communication Distance
RX Sensitivity
Bluetooth
Other
5V
500mA
10m
≤-94dB
5.0
provide warranty service of repair, replacement and
refund. The services provided are shown as below:
1. Within 7 days starting from the date of purchasing,
users can return the product in the event that the fault
occurs during normal use is caused by non-human
factors and has been identied through inspection;
2. Within 15 days starting from the date of purchasing,
users can replace the product of same model in the
event that the fault occurs during normal use is caused
by non-human factors and has been identied through
inspection;
3. Within 12 months starting from the date of purchasing,
users can enjoy free maintenance in the event that the
fault occurs during normal use is caused by non-human
factors and has been identied through inspection.
650-680MHz
GB8898-2011VCarried Standard
Frequency Range
Receiver
风琴折
Pantone Cool Gray 8C Pantone Cool Gray 1C纯麦X2英文说明书
郭丽娜
产品名
设计于
105g 哑粉纸物料材质
特殊工艺
折叠尺寸：57 x 149mm 展开尺寸：342x149mm
产品名
设计于