User's Manual

PACKING LIST MICROPHONE KEY
DESCRIPTION
Mic Volume +/-
Sound Effect Switch
Power On/Off
(Press for power on/
Holding press for power off)
Mic Indicator Light
Charging Port
(Please read the
following notes carefully)
Note: The product has been paired before
delivery. Do not pair again unless it is
necessary. It is recommended that users
conduct the pairing in the event that the
microphone and receiver fail to connect
(please refer to the description):
The microphone is on, the indicator light of
receiver is flickering slowly and there is no
sound of the microphone; it is
recommended that users conduct the
pairing in the event that the above
mentioned problems fail to be solved by
re-plugging the receiver.
INSTALLATION & USE INSTALLATION & USE PAIRING
Setting Steps for Speaker Use
1.Insert the 3.5mm Aux cable of the
receiver into the Speaker's AUX connection
socket;
2.Connect the Phone/Pad with the receiver
through Bluetooth and play songs;
3.Turn on the microphone and start singing.
RECEIVER DESCRIPTION
Indicator Light
Power key
Type-C Port
Wireless Microphone
×1/2*
Note:
Remenber that these karaoke microphones should
not be used by the driver and can only be used by
passengers who are not distracting the driver.
Steps for Pairing
1.Keep one microphone power off, Hold
the VOLUME+ key and POWER key at the
same time for over 5s, the indicator light
of microphone will frequently flicker to
start the pairing mode;
2.Keep another microphone power off,
Hold the VOLUME- key and POWER key at
the same time for over 5s, the indicator
light of microphone will frequently flicker
to start the pairing mode;
FAQ
The power indicator light of microphone
is not on.
Make sure the battery power is not low,
otherwise, please charge in time.
What kind of charger is compatible to the
microphone?
The mobile phone charger that supports
5V output can be utilized to charge the
microphone. Please identify from the
words on the charger whether it supports
5V output.
Microphone is no sound
1.Check if the microphone is turned on and
its indicator is solid blue;
2.Make sure that the receiver has been
correctly inserted into the interface of
devices;
3.If the indicator light is not on, you can
follow the official Facebook account or You-
tube account to view the pairing process and
try.
Speaker is no sound
1.Check if the receiver indicator light is on,
and make sure the receiver has enough
power.
2.If the receiver indicator light is on,please
try to adjust the volume of the speaker &
increase the microphone volume.
FCC STATEMENT
NOTICE
1.Please keep the product away from
high-temperature and damp places so as
to avoid any breakdown.
2.It is recommended to charge in time in
the event that the product is not in use for
a long time so as not to compromise the
service life of battery.
3.The product has been paired before
delivery for direct use. Please DO NOT pair
unless it is necessary, otherwise, the
product may not function properly.
Shanghai Loostone Information
Technology Co., Ltd
SJTU Park
Songjiang District, Shanghai
www.loostone.com
Receiver
×1
Users Manual
×1
Type-C Charging Cable
×1
Manual
Microphone Indicator Light Description
Solid Blue
Quick Flashing
Blue
Solid Red
Green Light
Flashing
Microphone in normal
working mode
Microphone in
pairing mode
Low power on
microphone
Microphone under
charging
Receiver Indicator Light Description
Quick Flashing
Blue
Solid Blue
Solid Green
Slow Flashing
Green
Slow Flashing
Red
Slow Flashing
Blue
Microphone in normal
working mode
Receiver and Micro-
phone in pairing mode
Receiver and Micro-
phone unpaired
Low power
Receiver under
charging
Receiver fully charged
If there is no sound after the installation or
not available to use, please contact us at
the first time via sales platform or offical
account.
1.Insert the 3.5mm Aux cable of the receiver
into the Car’s AUX connection socket.
2.Connect the Phone/Pad with the receiver
through bluetooth and play songs.
3.Turn on the microphone and start singing.
Note: This connection only supports car with 3.5mm
AUX interface.
3.Put the microphone close to the receiver
within a range of about half a meter. Make
sure no other objects in between;
4.Holding press the receiver POWER key
for 5s untill the indicator light of receiver
to flicker frequently;
5.The microphone and receiver have been
paired up once the indicator light of
receiver flicker frequently;
SPECIFICATION
Working Voltage .................................. 3.6~4.2V
(Lithium Polymer Battery 1000mA)
Working Current ....................................... 55mA
Charging Interface ................................. Type-C
Input Voltage .................................................... 5V
Input Current .................................................... 1A
Microphone Mode ......................... Moving-coil
Polar Pattern .......................................... Cardioid
Material ........................................................... ABS
Microphone
Dimensions ......................... 173mm×ф38.8mm
Working Voltage .................................. 3.6~4.2V
(Lithium Polymer Battery 1000mA)
Working Current ................................ 200mAh
Input Voltage ................................................. 5V
Input Current ................................................... 1A
Sensitivity ........................................... ＜-94dBm
Communication Distance .......................... 10m
Wireless Type ............................. Inner Antenna
Bluetooth Name .. Loostone PureMic Q1PRO
Facebook: Puremic Home Karaoke
Speaker
NOTE: This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates uses and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in
a particular installation.
Youtube: Puremic
WARRANTY INFORMATION
1.1-year Limited Warranty for Manufactur-
er ’s Defects.
2.During the warranty period, parts
necessary will be provided free of charge
to make the product capable of being
operated for its ordinary purpose.
3.This warranty does not include transport,
delivery or handing charges incurred in the
transportation to and from the seller.
This warranty is effective only for the
ORIGINALLY PURCHASE and not for resale.
Therefore under circumstances, rights
under this warranty are not assignable.
This warranty will not apply to any failure
due to any of the following:
1.Improper maintenance or repair, including
the installation of parts of accessories that
do not conform to the quality and
specifications of the original parts.
2.Misuse, abuse, neglect and improper
installation.
3.Usage of wrong electrical supply/voltage.
4.Usage not in accordance with the
instruction manual.
5.Accidental or intentional damages.
6.Corrosion rust or stains.
7.Normal wear and tear.
8.Breakdowns caused by other appliances.
9.Damages due to unsuitable packaging
and /or shipment method.
10.Damages due to natural disasters or acts
of war or public disturbances.
11.Repairs or alterations by an unauthorized
agency.
LIMITATIONS OF THE
WARRANTY
Note:
*The list should be the same as the selected package.
Holding press for
power on/off
Press twice to
reconnect B
luetooth
Scan the QR code to
get the installation
video.
Setting Steps for Universal
Auto/Car
Microphone
Receiver
K80
K50 RED 032C亚马逊Q1 Pro说明书
郭丽娜
产品名
设计于
105g 哑粉纸材质 风琴折
工艺展开尺寸：350x120mm 折叠尺寸：50 x 120mm
颜色
尺寸
V1.0.0
PUREMIC WIRELESS MICROPHONE
USED ON MULTIPLE WAYS
Users Manual
Q1 Pro
LS04.04.00.0088.00
6.Briefly press SOUND EFFECT key and
ON/OFF key at the same time for both
microphone to exit the pairing mode. At this
moment, the indicator light for both
microphone and receiver will be on. That is,
they have been paired.
If this equipment does cause harmful
interference to radio or television reception,
which can be determined by turning the
equipment off and on, the user is
encouraged to try to correct the
interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the
equipment and receiver.
-Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced
radio/TV technician for help.
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user's authority
to operate the equipment.
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful
interference;
(2) this device must accept any interference
received, including interference that may
cause undesired operation.
FCC ID: 2A7ZRPWMAZ-Q1 (Microphone)
FCC ID: 2A7ZR-Q1PRO
双面印刷版面的对齐