User's Manual

Chargingyourbattery:
1. InserttheUSBconnectorofthechargerintothephone.
2. Whenchargingiscompleletd,removetheUSBchargerfromthe
phone

PoweringthePhoneOnandOff
Beforethephoneispoweredon,ensurethatthephonehas been charged
and that the (U)SIM card is inserted in  the phone. When the phone is
powered on without (U)SIM card inserted, a message will be displayed
advising that the (U)SIM card must be inserted to continue. Without the
(U)SIMcardinsertedthephonewillonlysupportemergencycalls.

The phone can be powered on while it is being charged. If the phone
powers off automatically due to low power, the power‐on info will not
displayuntilithasbeenchargedforseveralminutes. 

TurningthePhoneOn
1.PressandholdEND/POWERKey.
2.If the phone has been locked, insert the lock code and select the
CENTRALKEYtoconfirm.
3.The homescreen will display the default wallpaper and screensaver.
Theseimages canbechangedtooneofyourchoice.Formoreinformation
seethesectiontitledSETUPYOURPHONE.
 Afterthephoneispoweredon,itwillidentifythenetworksupplier
automaticallyandfinishsettingupthewirelessnetworkparameters.Ifthe
phonedoesnotconfigureallparametersautomatically,pleaseconsult
networkservicesupplierforthecorr ectparameterstocompletethis
processmanually.

TurningthePhoneOff 
1.PressandholdEND/POWERkeyforapproximately4seconds..
2.Thephone has been poweredoff oncethepowerdown animationis
completed.
 Note: when the phone is powered off, all phone functions are
disabledex ceptforthealarm.

7