User's Manual

X591E User Manual
10
3. Installing of T-Flash card
This mobile phone supports T-Flash card (you might buy it
separately), which is a small multimedia memory card used to
increase the memory of your mobile phone. Take care when
installing to avoid the damage.
Installation methods of T-Flash card:
Shut down the mobile phone & remove battery before inserting
memory card. Insert the T-Flash card in the groove with the
golden metal contact facing downward, put back the cover of
T-Flash socket and pulling forward to lock it. After the battery
assembled, The T-Flash Card can be used after normal switch
ON.
4. Battery charging
Plug the charger into the data cable port at the bottom of the
mobile phone. Then the power indicator at upper right screen
will flash. While charging, if the phone is off, the screen will
display an icon indicating the battery is being charged. And after
charging is done, it would be prompt with “Charging Complete”.
When the power indicator at upper right screen of the phone
displays battery full and stops flashing, it means that the charge
is done.
When battery is low, phone will give you warning alert, when it
is too low will automatically switch off.
After the charging, disconnect the AC socket and mobile phone
from the battery charger. During charge, it is normal if the
battery, mobile phone and battery charger become hot.