User's Manual

3G ROUTER USER GUIDE
4
The indicator of the connection is on when the connection with Ethernet LAN interface is successful. The length
of the Ethernet cable must be less than 100 meters (328 feet). If you want the better effect, please use the shielded
cable.
Step 4: Connect to a Telephone
To avoid the coming call effect from interfering by the wireless signal, place the phone set one meter or more
away from 3G ROUTER.
Step 5: Place 3G ROUTER
Place 3G ROUTER on a higher place or near the window for the better signal strength. To avoid electrical device
from interfering by the wireless signal, place the electrical devices one meter or more away from 3G ROUTER
Step 6: Use 3G ROUTER
3G ROUTER works immediately when it is powered on. Then user can log in the configuration WEB UI page for
operation. For the more detail information, see the following chapters.
Making a Call
3G ROUTER offers traditional circuit-switched telephony service. So user can make a call just by simply plugging
any plain telephone set to 3G ROUTER’s analog RJ11 connector after powered on.