User's Manual

3G ROUTER USER GUIDE
2
z Blinking slowly in Yellow: Having registered in 2G network
z Double blinking in Yellow: Working in 2G network
z Lighting in Red: Error. For example: No SIM card or network
registering failed
Coming Call Indicator It is flickering when having coming call.
WLAN Indicator It is light when the Wi-Fi WLAN is ready.
Ethernet LAN Indicator It is flickering when the LAN is being used.
Reset Key Resume the factory setting and reboot the router
Power Port Connect with a power adapter
Phone Port Insert a phone cable to connect with phone set.
Ethernet Port Insert an Ethernet cable to connect with PC or laptop.
USB Host Port Insert USB cable to connect with a mass storage device or a USB printer.
Note: 3G ROUTER does not support the hot plug of the SIM card. Do not pull out the SIM card during the
connection.
Note: USB host port only supports the unit storage device such as U disc in the format of FAT 32. Do not
connect the power adapter or bulk USB device to the USB host port.
PC Configuration Requirement
z CPU: Pentium 500MHz or above
z Memory: 128MB RAM or above
z Hard Disk: 50MB available space
z Operating System: Windows 2000/XP/VISTA
z Display Resolving Power: 800 × 600 pels or above（1024 × 768 is recommended）
z Interface: Standard USB 2.0 interface
z Internet Browser: IE 6.0 or above edition / Firefox 1.5 above edition