User's Manual

3G ROUTER USER GUIDE
21
Wireless access control enables or disables the wireless access control rule. If you select “Enabled”, it is shown as
the following picture:
z “Control rule”: There are two control rules “MAC address deny” and “MAC address allow”. “MAC address
deny” means that the devices which have the appointed MAC address are denied to access 3G ROUTER via
WLAN; “MAC address allow” means that only the devices which have the appointed MAC address are
allowed to access 3G ROUTER via WLAN. Click the “Add” button to add another MAC address.
Wireless Status
All the active wireless clients are listed in this part.
The information of active wireless client listed here includes IP address, MAC address, channel and rate.
Firewall Settings
Click “Firewall” in the operation navigation to list the submenu of firewall settings.
Client Filtering
The client filtering is based on IP address. If you enable the client filtering function, you should input an IP address
range. And the device with the IP address in this range will be blocked from browsing the Internet. You can click
“Add” button to add a new IP address range.
MAC Control