User's Manual

7
3 Getting Started
Please read the safety instructions in the "Safety Information and Notices" section
before use.
3.1 Inserting the SIM Card and the battery
3.1.1 Insert the SIM card
Make sure that the clipped corner of the SIM card is facing the correct direction
(clipped corner at top left) and the metallic contacts are facing downwards. Slide the
SIM card into the card slot until it stops.
3.1.2 Install the battery
With the metallic contacts of the battery facing the metallic contacts in the battery
slot, press the battery down until it locks into place.
3.2 Inserting a Micro SD (External Memory) Card
Slide the Micro SD card into the micro sd card slot with the metallic pins facing
downwards.
Push the card until it locks into place
To remove the Micro SD card, press the flexible wall on top of the card downward
and slide the card outward simultaneously.
3.3 Turning the phone on
To turn the phone on, press and hold the Call End key. If you have already enabled
the Sim Lock fucntion then enter the PIN code (the 4 to 8 digit code of your SIM
card). It is preconfigured and provided to you by your network operator or retailer. If
you enter an incorrect PIN code 3 times in succession, your SIM card will be locked.
To unlock it, you must obtain the PUK code from your network operator.
3.4 Charging the Battery
Ensure the battery in inserted in the handset. To charge the battery, plug in the
charger connector at the bottom of your phone (USB interface) and then plug the
other end into an AC power socket.
The battery symbol indicates the charging status. While charging, the charge
indicators will scroll. When all the scroll bars are steady, the battery is fully charged.
It takes about 4 hours to fully charge the battery.