User's Manual

A8000 User Guide
Confidential
A8000_User_Guide_V1.0 Page 21 of 22 2009/05/13
75 HOOT_DET
Hook detect GPIO External interrupt input
76 GND
Ground
77 GND
Ground
Notes:*CC interrupt is an interrupt detecting mechanism that means system will capture the contents of a timer on specific
internal or external events, and they can compare a timer content with given values and modify output signals if they match.
IMPORTANT NOTE:
This module is intended for OEM integrator. The OEM integrator is still responsible for the FCC
compliance requirement of the end product which integrates this module.
20cm minimum distance has to be able to be maintained between the antenna and the users for the host
this module is integrated into. Under such configuration, the FCC radiation exposure limits set forth for
an population/uncontrolled environment can be satisfied.
Any changes or modifications not expressly approved by the manufacturer could void the user's
authority to operate this equipment.
USERS MANUAL OF THE END PRODUCT:
In the users manual of the end product, the end user has to be informed to keep at least 20cm
separation with the antenna while this end product is installed and operated. The end user has to be
informed that the FCC radio-frequency exposure guidelines for an uncontrolled environment can be
satisfied. The end user has to also be informed that any changes or modifications not expressly