User's Manual

1）Make sure that the device is placed on a flat and solid ground with no other object at the
bottom-----------------------------------------------------------------------------please refer to picture 5.1
2）Make sure that the device is not dependent on any object around, and there is no other
objects are placed on the top.-----------------------------------------------please refer to picture 5.2
When the power is turned on, the device will automatically turn on and wait for the device to
complete the self-check (the ball cabin will reset and stop after turning counterclockwise and
clockwise each half a turn).
【Picture 5.1】 【Picture 5.2】 【Picture 5.3】
6
p2
3）Make sure that the device is close to the Wi-Fi signal and far away from electrical appliances
with strong interference..-----------------------------------------------------please refer to picture 5.3