Link every thing for cat’s life. CATLINK SCOOPER User Manual2.0 for AI Litter Box-PRO Shanghai Lianchong Intelligent Technology Co.
【Contents】 【Unpacking operation】 1 【Product structure & Function differences】 4 【Packing list】 【Working mode & Protection Mechanism】 【Control panel&Mode Description&Button Operation】 3 5 8 【Indicator conditions】 11 【Cat litter Replacement】 15 【Wi-Fi Connection】 【Product Cleaning and Attentions】 【Exception Dealing】 【Product Specifications】 【Catlink Features】 【Afer-sale Service】 12 16 18 20 20 23
【 Unpacking operation】 1 Check whether the items are complete according to the【Product List】(Page 3). 3 Insert the power adapter into the power port at the back of the product. 2 4 Place the product properly according to the【Product structure】 （Page 4）. -------------------------------------------------------------------------------------------please refer to picture 3.1 Check whether the waste bag is properly inserted, and properly push the waste bin back to its original position.
3）Make sure that the device is close to the Wi-Fi signal and far away from electrical appliances with strong interference..-----------------------------------------------------please refer to picture 5.3 【Picture 5.1】 6 【Picture 5.2】 【Picture 5.3】 When the power is turned on, the device will automatically turn on and wait for the device to complete the self-check (the ball cabin will reset and stop after turning counterclockwise and clockwise each half a turn).
7 8 9 Download the CATLINK APP and refer to 【Wi-Fi Connection】(Page12 ) for network connection. Add enough cat litter to the ball cabin, paying attention to be below the Max line. Note: Pro version is suitable for bentonite cat litter, mixed cat litter (bentonite & tofu litter)Standard/Luxury/Young version is suitable for bentonite cat litter only. The litter box can be used normally when the above steps are completed.
【Product structure】 1 Cover 2 Ball Cabin 3 Base 4 Waste Box p4
【Function differences】 Function Standard Luxury Ambient light × ✓ Cat litter volume monitoring × ✓ Temperature and humidity sensing Protection from weighing sensors Anti-pinch protection Radar protection UV sterilization × ✓ ✓ × × ✓ ✓ ✓ × × Standard Pro Luxury pro × ✓ × × ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ Note: The ambient light needs to be turned on CATLINK APPafter the connection to the network 1.
【Working mode】 Mode Icon of App &Control panel Operation method "In this mode, if the device detects a cat's entering and leaving, it will automatically cleanthe ball cabin once after the safe time has passed.
【Protection Method】 Protective function Radar protection *Only supported by Pro version Priority level Notifications 1st The radar protection will be activated when a moving object enters the ball cabin, and the ball cabin will stop rotating; The ball cabin will rotation again when the object is confirmed to leave. Protection from weighing 2ed The ball cabin will stop rotating when an object larger than 1.
【Control panel】 Error indicator Wi-Fi indicator Child safety lock indicator Auto mode indicator Timer Mode indicator Start/Pause button Manual Mode indicator Empty Mode indicator Mode button 【Button Functions】 1 Mode button The mode will be switched in order from Cat, Manual, Timer, Empty in a cyclicThe mode will be switched in order from Cat, Manual, Timer, Empty in a cyclic manner each time you press the button. 2 Note: The timer mode only works with Wi-Fi connection 2.
3 Panel locking button Press and hold the Mode button and the Start/Pause button for three seconds. Release the buttons when you hear a beep. If the Panel lock indicator is on, the panel locking is successfully enabled. If you want to disable the panel locking, repeat the above-mentioned operations. If the Panel lock indicator is off, the panel locking is successfully disabled.
【Indicator conditions】 Indicator Lighting conditions Notifications Auto mode indicator Constantly on The device is in the Auto mode. the device is available for cat to use and will sense the cat's entering and leaving and operate automatically. Manual Mode indicator Constantly on The device is in the Manual mode. The device is available for a cat to use and needs to be manually operated. Timer Mode indicator Constantly on The device is in the Timer mode.
【Indicator conditions】 Lighting conditions Indicator Error indicator+ Child safety lock indicator Wi-Fi indicator Child safety lock indicator + Fast flashing Slow flashing Lights off Constantly on Flashing Lights off Constantly on Notifications During weighing, the device is suspended During radar protection, the device is suspended Not connected Wi-Fi connection Connecting Not locked Locked Note: Cat Sensor 1.
【Wi-Fi Connection】 1 Activate/Zeroing Program(It must be operated under the condition that there is no cat litter in the ball cabin and the trash box is empty) *After the machine is powered on,the Start indicator flashes and the ball cabin does not rorate. Press and hold the Mode button, then after hearing a beep twice, release the button to activate 2 3 the zeroing program Download the CATLINK in the application market of your phone after the self-checking (lasting for 2 minutes) is ended.
6 Operate according to the instructions on the CATLINK----------------------please refer to picture 6.1 "If the Wi-Fi connection indicator is constantly ON, the device already has Wi-Fi connection and can be controlled from the APP." *If there is a network connection failure, please patiently re-operate it again, and pay attention to check whether the WiFi password is correct. There may be a problem of poor network connection for some Android users.
Mode Manu 【Picture 6.1】 Empty 【Picture 7.
【Cat litter Replacement】 1 Short press the mode button once until it switches to the empty mode 4 After the ball cabin is reset, take out the waster box, seal and discard the waste cat litter, put on a new waste bag, and push the waste box back to its original position 1 2 3 The ball cabin starts to rotate clockwise when a single short press of the start/pause button After the ball cabin's litter drop port faces downwards and all the cat litter has fallen into the waste box, short press the start/pau
【Product Cleaning and Attentions】 Open the cover--------- 1 Refer to the steps of【Cat litter Replacement】(Page 15) , and power off after the cat litter is empty 4 Take out the waste box and the filter cotton (The filter cotton is recommended to expose to the sunshine once a month and replace it once every two months) 2 5 3 Take out the ball cabin (pay attention to remove the supporting rod of the rotating shaft on the back of the ball cabin) Parts can be washed directly (be sure to wipe and dry thoroug
6 Parts can be wiped with wet wipes ( contains electronic parts and cannot be washed directly) 7 After cleaning up, install a new filter cotton back to the waste box, and follow the reverse steps to assemble the device properly p17
【Exception Dealing】 Exceptions Operation method The device stops running due to abnormal radar/weighing protection Cancel by manual or full waste box The device stops running due to the Cancel by manual anti-pinch function being triggered Inaccurate cat litter volume (The situation that the sensor in the cover is covered by dust has been excluded) Operation steps Press the Start/Pause button once Press the Start/Pause button once 1 Empty the cat litter Adjust the cat litter volume 2 Switch to manual
Exceptions Inaccurate weighing data(Inaccuracies caused by the use environment have been excluded)） Operation method Adjust the weighing Operation steps 1 Empty the cat litter 2 Power off and restart the device 3 Put a 1.5kg object into the ball cabin after rotating the ball cabin, press and hold the mode button, release it after hearing two beeps, the mode button indicator will flash 1.
【Product Specifications】 Name CATLINK AI Litter Box-Scooper Pro Product Model CL-05/CL-06 Size 600x580x710mm Primary material Rated voltage Rated power General Scope Weight Carried standard PP 12V/2A 5W Cat (1.5-10 kg) 10KG GB 4706.1-2005 The specifications of different models or batches of products may vary. 【Catlink Features】 1 【Health Ecosystem】 The device has function of multi-cat recognition, and the health report of each cat can beviewed in the Catlink App.
2 【CATLINK equipment sharing】 3 【CATLINK unlimited numbers of cat】 The main account can share unlimited permissions to family menmbers and friends, and their can control the device or view health reports through the APP A single device can be associated with multiple cats without limitation.
CATLINK APPScooper Standard CATLINK APPFadder CATLINK APPFountain Health ReportSummary about excreting that day Health ReportSummary about eating that day Health ReportSummary about drinking that day The CATLINK APP page will be updated from time to time. The actual report page may be different from the above picture. The above picture is for reference only.
【Afer-sale Service】 According to China's national regulations, we will provide customers with a one-year free warranty service. After-sales service contact information in Mainland China 1.Customer service of your CATLINK 2.WeChat of after-sale:18121365823、18121136180 3.Tel Number of after-sale:18117545826、18121136180 4.mailbox of after-sale:customer@catlink.cn *For after-sales service in other regions, please contact your local dealer.
【Service Card】 Dear CATLINK user, thanks for using CATLINK series products, please read the following warranty clauses carefully before using this product. 1. The warranty period of this product is: within one year from the date shown on the valid purchase certificate. 2. During the one-year warranty period, our company will provide free warranty service for failures caused by the quality of the product when the user uses the product normally. 3.
Name of user 【Service Card】 Tel of user Address of user Name of product Purchase date The way of buying Problem Description p25
Link every thing for cat’s life. Shanghai Lianchong Intelligent Technology Co., Ltd Company address: Kehai Building, 800 Naxian Road, Pudong New Area, Shanghai, China Company number:021-50686520 Company mailbox:business@catlink.cn Company website:www.catlinks.
FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
