Users Manual

Charging
1. Charging ring scanner
Red light: in charging
Green light: fully charged
Charging Illustration 1
Charging Illustration 2
Connect the ring cradle to power, click the ring scanner into the
bottom of cradle with the scan window upward. Please note the
power contacts of the ring and cradle must be touched.
The red light indicates it is in charging, when the green light turns
on, it’s finished charging.
Warning: don't look straightly into the scan window when scanning in
case of laser harm to eyes.
2.Take the ring scanner out of the cradle
Hold the middle of the ring scanner gently and pull out upward
from the cradle.
Bluetooth connection
Connect with PC:
Firstly, connect the charging cradle with computer via USB
cable, the green light on the cradle turns on. Secondly, after
15 seconds, ring scanner scans the "Bluetooth connection"
barcode on the front of cradle, the blue light on the cradle
indicates the Bluetooth communication between ring scanner
and cradle is successfully set up.