Instruction Manual

18
notification light of the Stemoscope PRO will blink.
In mode II, Bluetooth pairing in the phone
settings is NOT needed or supported.
The home user interface will be updated once
connected. The “listen & record” button will start to
animate. The battery power level of the
Stemoscope PRO is displayed. When the power is
low, please charge it timely. You can press the
“livestream” button to make a video call to your
doctor/patient if you have access to the cloud
service.
Step 3. Press the “listen & record” button to start
listening. The “listen & record” user interface is
customized for non-medical professionals and
medical professionals respectively. The “listen &
record” user interface has three recording themes:
“video,” “heart,” and “lung”. You can listen to the
sounds in any of these three themes. Internal
phone speakers are not good at playing body
sounds that have many low-pitched components.
Therefore, please use high quality earphones
(either wired or Bluetooth) to listen. Even if you