Installation Instruction

NAKe Series Non-contact Level Switch Installation Instruction
SHANGHAI HUIBO AUTOMATIC GAUGE CO., LTD
Address: Room 1611, Lijing Yangguang Building, NO.19 Wuning Road,
Shanghai,China
Web Site:www.china-huibo.cn Email: [e-mail]
③、Open the terminal Cover(with glass window). Screw up the Antenna
and connect the Antenna from inside the terminal Cover.
③、Put the Level Switch into the clamp rings, with the terminals end
facing out, the front end (stainless steel) pointing at the container, the
distance 30-50mm from the insulation layer to the front end, and the
waterproof cable lock downward.
④、Fasten the Level Switch and the clamp rings.
④、Wiring the Level Switch, and put on the terminal cover.
Antenn
a
Clamps and fastens
Cable lock
Left view
Right View
Steel Angle, horizontally welded to the Coal Ash Hopper
with the 350mm length outside the insulation layer.
Terminal Cover