User Manual

4.1Report location information regularly
The terminal regularly reports the location information to the platform in a
hybrid way of satellite positioning and LBS.If the car is parked and not used for a long
time,The terminal will go to sleepRestDo not upload location information during
sleep, vibration can wake up the terminal
4.2 Mileage statistics
If the platform display mileage is not consistent with the car odometer, you
can edit the platformThe initial mileage of the terminal is synchronized with the
mileage of the car. GPS mileage statistics are for reference only.
4.3Alarm function
Alarm method: 1. Platform2. Platform + APP.
4.4 electronic fence
An area can be set as the electronic fence range through the platform. When
vehicles enter/exitWhen the area is set, the terminal will trigger the
corresponding alarm when the set conditions are met.Check-in platform.
4.5 Overspeed alarm threshold
By default, the terminal's overspeed alarm function is disabled. Can be set via
platform or SMSVehicle speed limit threshold, when the vehicle's driving speed
within the set time is greater than the speed thresholdWhen, an overspeed
alarm occurs.
4.6 Remote restart
When an exception occurs and the terminal needs to be restarted, the platform
or SMS command can be remotely controlledRestart the terminal (SMS
command: RESET#)