User's Manual

 Page
12
6. GETTING STARTED WITH DIGITERRA EXPLORER 7
1. Go to Start menu --> Settings --> System
2. Select External GPS icon
3. On the Software port tab: select COM4
4. Then on the Hardware port tab: select COM3 and Baud: 57600
Start DigiTerra Explorer 7:
1. Go to Settings > GNSS tab Port: COM3 Baud: 57600
2. If you intend to use RTCM corrections go to the Settings > NTRIP tab
and set Port: COM4 and Baud: 57600
3. Finally select the proper script from the /Scripts/CHC folder in the
installation directory on the Settings > Command tab > Command File
button and then you can connect to the GNSS receiver on the GPS >
Status panel.
Available scripts for LT 400 HS:
LT400HS-GLONASS.txt
LT400HS-NTRIP.txt
LT400HS-SBAS.txt
Note: Users should run the scripts when
switching connection from SurvCE to DigiTerra.