User's Guide

APACHE 3 User Guide (Network Bridge Version)| 2021-02 P a g e
|
12
Figure 2-5 Connect battery-powered interface
Note: Two large batteries are placed in the boat. Pay attention to the direction when
installing the battery power detection interface.
2.3.2 Mount the accessories of the ground station
Figure 2-6 Working with backpack Figure 2-7 Working with tripod
2.3.3 Debug before launching the boat
1). Boot the boat
Turn on the switches on both sides of the boat. Pay attention to the lights on both
sides, when the red satellite lights and green differential signal lights are always on,
they are in normal working condition.
2). Turn on the remote control
The switch button is in the lower left corner. Press the key first, then long press
quickly, and wait until the indicator lights up gradually, showing that it has been
successful booted. The indicator light represents the power of the remote control.
The operation of powering off the remote control shutdown is the same.