User's Manual

Safety Directions
ALPHA3D USER MANUAL | 2019-06 P a g e | 90
carton and filling with shock absorbing cotton or foam inside. Buy a special insurance and
labeled as dangerous package.
◼ Alpha3D should be used and storage by special person and don’t rent device to other
people.
7.3 Alpha3D Using Tips
◼ During usage process, Alpha3D must be handled with care in order to avoid dirty and
scratch. Don’t sit on instrument container or packing box.
◼ After work finished outside, user should clean device’s surface regularly (3-5 days) with
wet tissue or alcohol cotton cloth. In addition, user should also check whether screws &
external cables are fixed.
◼ After long time storage, user should do power-on test regularly (1 month) to check
whether the function is correct.
◼ System using temperature is -10℃~+40℃ and using humidity is less than 80%RH. No
condensation.
◼ During assemble and test process, please put unit on cabinet or special shelf, and covered
by dust covers. The scanner part should cover by dust cap.
◼ If Alpha3D is disassemble or loose, it should be re-calibrated before next time work.
◼ If any part of device occurred rotation difficulty, don’t rotate forcedly. If Alpha3D is break
down, it should not be used to avoid damage increase and user should ask professional
staff for indoor maintenance. Don’t disassemble device outdoor.
◼ If face rain or snow during field work, please put device into container immediately. Don’t
work under low temperature in winter in order to avoid water vapor condensation inside.
7.4 Alpha3D Storage
◼ When Alpha3D is not in use, the battery should be handled with care and it cannot be
placed upside down as it’s an accumulator. The screws side should in upward.
◼ Alpha3D should store in dry warehouse tidily and try to avoid long-time storage.
◼ Alpha3D storage room should clean, dry, bright and excellent ventilation. Please place
device in flat or upright in order to avoid transformation.