User's Guide

72
satellites.
than four satellites are
tracked.
The receiver is not
responding.
The receiver needs a soft
reset.
Turn off the receiver and
then turn it back on
again.
The receiver is not
receiving satellite
signals
The GNSS antenna cable
is loose.
Make sure that the GNSS
antenna cable is tightly
seated in the antenna
connector on the GNSS
antenna.
The cable is damaged.
Check the cable for any
signs of damage. A
damaged cable can
inhibit signal detection
from the antenna at the
receiver.
The GNSS antenna is not
in clear line of sight to
the sky.
Make sure that the GNSS
antenna is located with a
clear view of the sky.
Restart the receiver as a
last resort (turn off and
then turn it on again).