User's Guide

64
7.1.2 Resetting the Receiver to Factory Defaults
Log in the web page of the receiver  tap and unfold the Receiver Reset menu 
tap the Receiver Reset submenu click the [Confirm] button to the right of Reset to
Defaults field.
7.1.3 Using Configuration Files to Duplicate Receiver Settings
The P5 GNSS reference receiver allows the extensive use of application files to retain
a unique receiver configuration. With this receiver, the user can create a
configuration file that includes most of the receiver's unique configuration settings.
The user can then update that configuration file onto one or more other P5 GNSS
reference receivers to quickly configure them to match the receiver which creates
that configuration file.
Notes: The configuration file includes most of the configuration settings except IP
Address, IP Mask, Gateway and DNS Server.
This is called receiver configuration cloning or cloning. Receiver cloning greatly
reduces the time required to prepare a large group of receivers for field operations.
Log in the web page of the receiver  tap and unfold the Firmware menu  tap the
Config File submenu  click the [Browse] button to locate the existing configuration
file  click [Confirm] button to confirm the selected file and start updating.