User's Guide

43
In this screen, the user can set all data logging parameters, and determine whether
the recording files will be affected by the FTP Push. The main parameters are as
follows:
a) Auto Record: Select “Yes” or “No” to determine whether to log data when the
Master Log Switch is ON.
b) Sample Interval: Select the observable rate from the dropdown list.
c) Store Location: Determine whether to store in internal storage or external
storage.
d) Start Date: Set the start time of data log in UTC. Select “Yes” or “No” option below
to determine whether to start logging from the set time.
e) Duration Time: Set the time interval of recording.
f) Storage: Set the storage limit of this thread.
g) Circulating Memory: Select “Yes” or “No” to determine whether to auto delete old
files if the storage space is full.
h) Storage Format: The default format of recording files is HCN.
i) FTP Push: Decide whether to push the stored files to the FTP server of the user’s
choice.
Click to save the settings and back to the Log Settings screen. Also, users
can click to abandon the changed settings and back to Log Settings
screen.
Notes: To delete the record data, the user can remove all the record data by the
total button and clear all accounts. Also, the user can delete each record
data by the clear button under the selected thread.
To delete the recorded files of ANY storage thread, click the to the right of
the required storage thread.
To delete the recorded files of ALL storage threads, click [Clear All] button.
(2) FTP Push Settings
Use this screen to configure the receiver to push stored files to the FTP server of the
user’s choice. Only files that are configured to use FTP push are transmitted. Click