User's Guide

 Manual Base: The receiver will serve as Base after the restart, and then broadcast

RTK correctors based on the coordinates before power off.

For Reference Latitude and Reference Longitude:

There are mainly three methods to enter the reference coordinates and shown as

follows:

 Acquire Current Position: Click this button to acquire current position obtained

through single-point positioning automatically.

 Manual Input: Manually input the known coordinates.

 From CORS: After logging in CORS, the receiver will obtain a coordinate based the

configurations at the Sample for Average field. (See 6.2.1.5. I/O Settings menu for

more details about logging in CORS.)

For Sample for Average:

If the users chose to get the location coordinate from CORS, the users could

determine the positioning limit and sampling amount. The positioning limit falls into

two types:

 Single Solution Coordinates: Collect the coordinates of receiver obtained through

single-point positioning.

 Fixed Solution Coordinates: Only collect coordinates of the receiver based on fix

solution.

After the configuration of positioning limit and sampling amount, click to

carry out sampling and to average  the result will be served as the coordinates of

the current position.

Also, users can click to save the current settings.

(4) Receiver Reset

Use this screen to completely or partially reset the receiver: