User's Guide

28
 Battery Temperature
 Internal Temperature
 Environment Temperature
 Internal storage memory remaining
 Receiver hardware version and software version
 Firmware Version
 Receiver serial number and part number
 Resume
5.5 Setting Up the Receiver as Part of An Ethernet
Configuration
Use the keypad to set up the receiver as part of an Ethernet configuration. Press
or to move between different status screens, and then press to
enter the edit mode.
(1) Turn on the receiver by pressing the button or connect the receiver to the
external power supply.
(2) Press or to move to IP Addr status screen.
(3) Press to edit IP address.
(4) Press or to select the character to edit and then press or
to change it.
(5) When finished, press , and then the “Setting Success” message will appear on
display.
(6) Follow the step 2 to step 5 to edit IP mask, gateway, DNS server and HTTP port in
the IP MASK, Gateway, DNS Server and HTTP PORT status screen, respectively.