User's Guide

23
(1) Install the GNSS antenna at the appropriate location (see 4.1.5. Placing the
antenna for the guidelines); connect the antenna to the TNC Plug Socket of P5
via the GNSS Antenna Cable.
(2) Power the P5 by an external power source (e.g., mains supply) with Adapter via
CHC Data Cable.
a) Connect the 10-pin LEMO of CHC Data Cable of P5.
b) Plug the male jack connector Adapter into the female connector of CHC Data
Cable.
CHC AT312 GNSS
Geodetic Antenna
CHC Data Cable
Network Cable
Adapter
GNSS Antenna
Cable