User's Manual

Page6
CAUTION:TovalidatetheSettingyouneedtoturntheP3EreceiverOFF
andthenON.
 HCGPRSCeRadioandbuilt‐inGPRSmodulesetup.
 RTKCe / LandstarSoftware to perform RTK Surveying Data
collection(requiresactivation).
3.2.2 INSTALLINGCHCSOFTWARE
TheP3EsoftwareRTKCe,HCGPSSetandHCGPRSCearebundledinone
combined CAB format installation package. To install, copy the
installationfiletoyourPDAorPCanddoubleclicktheontheCABfile.
Thesoftwareinstallationprocessstartsautomatically.
CAUTION:UseonlythelatestCHCsoftwareCABfilewiththeP3E
3.3. P
OWERI
NGTHE
P3E
P3Ecanbepoweredbyeitherconnectingittothemainspower(A.)or
toanexternalbattery(B.)
A. ConnecttothemainspoweruseCHCGPStoPCcable+Power
Adapter
Connect the Power Adapter socket to the
mains100‐240 VAC and Power Adapter male
connectortothePowerPortoftheGPStoPC
cable.
B. ConnecttoexternalbatteryuseCHCGPStoPCcable+external
powercable(optional)+Carbattery.
Properly connect the external power cable
to a car battery (respecting the polarity)
and then connect the Power Adaptermale
connectorto the PowerPort oftheGPS to
PCcable.