User's Manual

Page 7
X360 GIS Reference Receiver User Guide
A. INTRODUCTION
The X360 GIS Receiver User Guide describes how to set up and use the CHC
X360 GIS Receiver.
In this manual, “the Receiver” refers to the X360 GIS Receiver unless
otherwise stated.
Even if you have used other Global Navigation Satellite Systems (GNSS)
products before, CHC recommends that you spend some time reading this
manual to learn about the special features of this product. If you are not
familiar with GNSS, go to www.chcnav.com for an interactive look at CHC
and GNSS.
A.I. ABOUT THE RECEIVER
The X360 GIS Receiver (“the Receiver”) is a multiple-frequency GNSS
Receiver. It can track all GPS (L1/L2/)
You can use the front panel of the Receiver or an office computer to
configure the Receiver, access files, and publish data files to a company
Intranet or to the Internet. The Receiver makes it easy for you to set up
a powerful, flexible, and reliable station for continuous operation.
The Receiver serves in all common geodetic Receiver roles. It can be the
main component in a Continuously Operating Station (CORS), streaming
data to CHC GNSS Infrastructure software. It can also work well as a
campaign Receiver prior to permanent deployment. The Receiver makes
an excellent portable RTK base station with its internal battery. It also has
specialized capabilities that make it an excellent Receiver for scientific
applications.
A.II. TECHNICAL SUPPORT
If you have a problem and cannot find the information you need in the
product documentation or CHC website (www.chcnav.com), contact your
local CHC dealer from which you purchased the Receiver(s).
If you need to contact CHC technical support, please contact us by email
([e-mail]) or Skype (chc_support).