User's Manual

Page 47
X360 GIS Reference Receiver User Guide
7. Default Settings and Application Files
• USING CONFIGURATION FILES TO DUPLICATE RECEIVER SETTINGS
The X360 GIS Receiver allows the extensive use of application files in
order to retain a unique Receiver configuration. With this Receiver, you can
create a configuration file that includes most of the Receiver's unique
configuration settings. You can then update that configuration file onto one
or more other X360 GIS Receivers to quickly configure them to match
the Receiver which creates that configuration file.
NOTE: The configuration file includes most of the configuration
settings except IP Address, IP Mask, Gateway and DNS Server.
This is called Receiver configuration cloning or cloning. Receiver cloning
greatly reduces the time required to prepare a large group of Receivers for
field operations.
Log in the web page of the Receiver tap and unfold the Firmware menu
tap the Config File submenu click the [Browse] button to locate the
existing configuration file click [Confirm] button to confirm the selected
file and start updating.