User's Manual
6.
Configuring
the
Receiver:
Other
Than
Keypad
and
Display
Page
32
X360 GIS Reference
Receiver
User
Guide
Use this screen to select the web interface language:
• Data Recording menu
Use the Data Logging menu to set up the Receiver to log static GNSS data and
to view the logging settings. You can configure settings such as observable
rate, recording rate, continuous logging limit, and whether to auto delete old
files if memory is low. This menu also provides the controls for the FTP push
feature:
• Log Settings
Shows the data logging status, internal and external storage usage and
data logging status of each storage thread. Also, users can configure the
data logging settings for each storage thread, including recording name,
saving location, storage limit, store formats, start time, etc.