User's Manual

6.ConfiguringtheReceiver:OtherThanKeypadandDisplay
N72GNSSReferenceReceiverUserGuidePage34
andbroadcastRTKcorrectors:

 ReferenceStationSettings
Usethisscreentoconfiguresettingssuchasthestationcoordinates.You
mustenteraccurateinformationinthesefields,asthisdatasignificantly
affectstheaccuracyofloggeddatafilesandbroadcastRTKcorrectors.

ForReferenceStationMode:
Therearethreeavailableoptions:AutoRover,AutoBaseand
ManualBase.
 AutoRover:ThereceiverwillserveasRoveraftertherestart.
 AutoBase:ThereceiverwillserveasBaseaftertherestart,and
thenbroadcastRTKcorrectorsbasedoncoordinatesobtained
throughsingle‐pointpositioningautomatically.
 ManualBase:ThereceiverwillserveasBaseaftertherestart,
andthenbroadcastRTKcorrectorsbasedonthecoordinates
beforepoweroff.