User's Manual

N72GNSSReferenceReceiverUserGuidePage26
6. CONFIGURINGTHE RECEIVER:OTHERTHAN
KEYPADANDDISPL AY
YoucanconfiguretheN72GNSSreferencereceivertoperformawidevariety
offunctions.Thischapterde scribestheconfigurationmethodsotherthan
thefrontpaneldisplay,andexplainswhenandwhyeachmethodisused.
TheWinFlashutilitydescribedinthischapterisusedprimarilytoupdatethe
receiverfirmware.

6.1. CONFIGURINGTHEETHERNETSETTINGS 
ThereceiverEthernetportconnectstoanEthernetnetwork,thr oughwhich
youcanaccess,configure,andmonitorthereceiver.Noserialcable
connectiontothereceiverisnecessary.
ThereceiverhasthefollowingEthernetsettings:
• IPaddress
• IPmask
• Gateway
• DNSserver
• HTTPport
ThedefaultsettingfortheHTTPportis80:Thisportisnotassignedbythe
network.HTTPport80isthestandardportforwebserversandenablesyou
toconnecttothereceiverbyenteringonlythereceiver’sIPaddressinaweb
browser.
Forexample,using
port80:http://192.168.9.69
Ifthereceiverissettouseaportotherthan80,youmustentertheIP
addressfollowedbytheportnumberinawebbrowser.
Forexample,port9971:http://169.168.9.69:9971
UserscanconfiguretheEthernetsettingsthroughthefrontpanel(see5.4.
SettingupthereceiveraspartofanEthernetconfiguration)andaweb
server.Touseawebserver,thereceivermustbeconnectedtoanetwork
andhaveavalidEthernetconfiguration.
NOTE:ThereceivershouldbeconfiguredtheEthernetsettings
throughthefrontpanelforitsfirstconnectiontotheInternet.