User's Manual

5.ConfiguringtheReceiver:KeypadandDisplay
N72GNSSReferenceReceiverUserGuidePage25
5.4. SETTINGUPTHERECEIVERASPARTOFANETHERNET
CONFIGURATION

UsethekeypadtosetupthereceiveraspartofanEthernetconfiguration.
Press
 or  tomovebetweendifferentstatusscreens,andthen
press
 toentertheeditmode.
1. Turnonreceiverbypress
 orconnectthereceiverwithexternal
powersupply.
2. Press
 or  tomovetoIPAddrstatusscreen.
3. Press
 toeditIPaddress.
4. Press
 or  toselectthecharactertoeditandthenpress
 or  tochangeit.
5. Whenfinished,press
,andthenthe“SettingSuccess”messagewill
appearonthedisplay.
6. Followthestep2tostep5toeditIPmask,gateway,DNSserverand
HTTPportintheIPMASK,Gateway,DNSServerandHTTPPORTstatus
screen,respectively.

