User's Guide

Getting Started with i90
CHCNAV i90 GNSS USER GUIDE | 2019-9 P a g e | 18
Auxiliary H.I. Tool
Transport Hard Case
2.6 Connecting to an Office Computer
The receiver can be connected to an office computer for serial data transfer or settings via a
HCE320 USB Type-C. Before you connect to the office computer, ensure that the receiver is
powered on by internal battery or external power.
The following figure shows how to connect to the computer for serial data transfer or settings:
2.7 Connecting to a Controller
2.7.1 Connecting via Wi-Fi with LandStar 7 Software
Turn on the controller → run LandStar 7 → go to Config main menu → tap Connect.
In the Connect screen, select CHC for the Manufacture field, i90 for Device Type field, WIFI for
Connection Type field.
HCE320 USB Type-C