Use Manual

7. Configuring through a web browser
i70 GNSS Receiver User Guide  Page 44
Click advanced to see more settings.
In this screen, you can configure all the data logging parameters, and
determine whether the recording files will be affected by the FTP Push.
The parameters are mainly as follows:
 File Name: The name of this logging session.
 Sample Interval: Select the observable rate from the dropdown list.
 Store Location: Determine whether to store at internal storage or
external storage.
 Enable Start Time: Set the start time of data logging in UTC. Select
Or not option below to determine whether to start data logging
from the start time defined, or immediately after this session is
switched on.
 Duration Time: Set the duration of data logging.
 Assigned Storage: Set the storage space of this session.
 Circulating Memory: Select Yes or No option to determine whether
to auto delete old files if the storage space is full.
 Data Format: Set the data format of the logged data.
 FTP Push: Decide whether to push the stored files to the FTP server
of your choice.