Use Manual

5. Rover station setup and operation
i70 GNSS Receiver User Guide  Page 33
 To continue to survey at centimeter precisions, the rover must
continuously track at least four satellites that the base station is also
tracking. The radio link between the base and rover receivers must also
be maintained.
 Loss of the satellite signals will result in a loss of centimeter position
precision.
5.2. R
OVER STATION SETUP
1. If required, connect the radio antenna onto i70 receiver.
2. Screw the receiver on top of the range pole.
3. Fix the controller bracket on the range pole.
4. Fit the controller in the controller bracket.
5. Level and plumb the receiver over the target measuring point.