Use Manual

3. Front panel operation
i70 GNSS Receiver User Guide  Page 23
Cancel
Click Enter button to cancel the settings of the
data logging and back to the top-level menu.
Receiver Info.
Click Enter button to enter the second-level
menus and check the basic information about
the receiver.
SN 1000514
Displays the Serial Number (SN) of the receiver.
PN 1180020032231
Displays the Part Number (PN) of the receiver.
Reg. 20301231
Displays the expiry date of registration code.
Ver. 1.1.41
Displays the firmware version.
Language English
Click Enter button to change the display
language between Chinese, English and
Russian.
Cancel
Click Enter button to back to the top-level
menu.
3.2. CONFIGURE THE WORKING MODE
7 working modes are provided for quickly setting up a RTK base station or
rover station. Users can configure each working mode through front panel as
follows:
Working Mode
Menus in Configuration Screen
Description
Base Cable
 Set up the receiver as a base station using
external UHF.
 Click Enter button to enter the
configuration screen.
Mode Base Cable
The title of this configuration screen.
Format CMR
 Click Enter button to change the correction
format.
 The available correction formats are: CMR,
CMR+, SCMR, RTCM v2.3, RTCM v3, and
RTCM v3.2.
OK
Click Enter button to save the settings and back
to the top-level menu, and then this working
mode will take effect.
Cancel
Click Enter button to cancel the settings and back
to the second-level menu.
Base Int. UHF
 Set up the receiver as a base station using
internal UHF.
 Click Enter button to enter the
configuration screen.
Mode Base Int. UHF
The title of this configuration screen.