User's Manual

TCP/UDP_Client :

1.In TCP/UDP_Client, two protocols can be selected: TCP and UDP.

2.Remote IP is the IP address and port number of the remote receiving PC, that is, the

destination address of the receiving end.

3.In Port number, set data send ports.

4.Differential data, raw data, ephemeris data, GPGGA and GPGSV are the individual output

types supported by the machine. users can set whether to output those data and the output

frequency.

5.After setting parameters, click [Confirm] under the page to save current settings. The

data entry can not be edited in the process of sending data and users can check the details

about settings when clicking [Details] button.