User's Manual

47
6.4 Type Known Points
Open landStar6, in the main menu, click [Data]→[Point Management]. Then click [New ]
to create new points. Some attribute values need to be set, including Name, Code, CRS
(including Local and WGS84), Format( can not be set), Role (including Null, to Stake Out
and Control), X, Y, H (or B, L, H). Among them, Code is non-mandatory. After setting above
values, click [OK ] and users have just created one point.
6.5 Point Adjust
Open LandStar6, in the menu, click [Survey]→[Point Adjust]. Then click [Add ] and
select GNSS points and known points. Select Hor.and Ver.Cali for Method. Fit Method is
Fixed Difference by default which can be changed according to the real situation. It is
better to add more than three pairs of points.