User's Manual

43
can select their required coordinates in the default coordinate system list. If none of
coordinate system in the template can be used, users can select [default(from template)].
Third step: click [Next ], and set Ellipsoid parameters. Users can select Ellipsoid Name
from the drop-down list. a and 1/f are two ellipsoid parameters corresponding to the
selected ellipsoid. The displayed values are default values.
Fourth step: click [Next ], and set basic parameters by selecting one model. Model
contains three types, including NONE, Bursa 7 Parameter and Molodensky 3 Parameter.
Fifth step: click [Next ], and set projection parameters. Users can select their required