User's Manual

34
1.using WIFI connection
Start the PDA, enter the main interface→[Settings]→[Connections]→[Wi-Fi], then find the
required receiver’s SN, input the WIFI password, the default password is 12345678, click
[Finish]. After connection, open Landstar6, enter WIFI connection by clicking [Device] at
the main menu. Select I80 Series for Device Type, select WIFI for Connection, select
[Rover] for Connection Type, then click [finish ] ( WIFI mode is suggested)
2. Using Bluetooth connection
Click [Device]→[Connection]. Select Bluetooth for Connection Style, click and
select the SN number corresponding to the rover. Select I80 Series for Device Type, select
[Rover] for Connection, select virtual serial port which supporting the Bluetooth connection
in PDA hardware(usually com5, com8 or com9), then click [finish
].