User's Guide

http://en.howaygis.com/
5
Side View Top View
3.2OperatingInstructions
A Unboxing Protocol
Upon receiving the device, check that you have received all included accessories
including host, battery, power adapter, 9-pin DC IN cable, and an arm.
B Installing the battery
R
emove the TG-T1 device and battery from the box, open the back cover,
and properly install the battery into the device.
C Booting the device
Turn the power switch to【ON】and make sure the power indicator light turns on.
Check the power indicator to see the battery level. If it is low, you can charge the
device first.
D Connect to Bluetooth
Op
en the Bluetooth settings on your phone to search for devices. TG’s
Bluetooth name is TG-T1******** and the password is 0000. Use your phone’s
app to open the Bluetooth connection and set the Bluetooth indicator to【On】。
E Using the TG-T1 device
◆Wear to use
Portable on the arm