PRODUCT SPECIFICATION PRODUCT 12VDC Dimmable PIR Sensor MODEL NO HB008VR-BT
12VDC Dimmable PIR Sensor HB008VR-BT 12VDC Input PIR Sensor Bi-level Dimmable, Daylight Threshold On/Off Control Detection Area Daylight Sensor Stand-by dimming level Hold Time Daylight Brightness Learning APP Mobile APP Control Stand-by period 50% 50% Daylight Harvesting Warranty Technical Data Detection Angle Operating Voltage Warm-up Period 10.
Detection Patterns 6.56ft 3.28ft Mounting Height Detection Range Max.6m/19.68ft Ceiling Mounted Radius.<2m/6.56ft 1.64ft 0 1.64ft 19.68ft 3.28ft 6.56ft 3.28ft 1.64ft 0 1.64ft 3.28ft 6.56ft Dimensions Unit:mm 67.02 25.8 18.1 Ø17.25 24.72 62.65 20.35 Mechanical structure Wiring Diagram 1 Pink GND Black white +12V L N LED+ Purple DIM+ LED- Quick Connector LED Driver 2 L Fresnel Lens N 1 DIM GND 12V 2 6.
Application of Daylight Harvesting In Sensor mode, preset daylight threshold as 50LUX or higher options, preset standby period as 0S, then press the DH button on the APP to perform this function. When ambient brightness is lower than preset lux level, sensor will turn on light automatically and keep dimming according to the change of the ambient brightness; when outside is getting darker, the inside will be brighter, and brighter darker.
Performance 1.Automatically ON/OFF function Hold time With sufficient daylight, even With insufficient daylight, the when motion detected, light sensor turns light ON when remains OFF. motion gets detected. The sensor turns OFF light automatically after the holdtime when there's no motion detected. 2.Daylight Disable When daylight threshold is preset as "disable", the sensor turns light ON when motion gets detected, and OFF after holdtime.
1. Please read the instructions carefully before using this product and keep it well for all users to read at any time. 2. The sensor should be installed by qualified electrician and ensure power is off before the installation. 3. We reserve the right to modify any incorrect text, image and necessary technical parameters. 4. Any unauthorized modification is forbidden, otherwise all guarantees will be immediately Attention invalid. Installation precautions 1.
APP OPERATING INSTRUCTION HAISEN ITL app, Owned by SHENZHEN HAISEN TECHNOLOGY CO.,LTD 1 2 3 4 5 Press the + button Choose the middle one, The APP starts to find The APP shows all the sensors that have The APP shows all the at top right corner or Sensor with Bluetooth.
9 10 8 Optional scenes that supports programming Choose to start a group and manually add wanted sensors. Grouping and saving, choose to enter any of them. Created groups will be shown on the first page with other sensors. Choose the group and starts to program it. 11 Reset Operation If the sensors have been connected to an APP and not available for new connecting, please follow below steps to reset them. 1. Has to work it with this HD03R remote. What should we do if we accidentally press 2.
Caution: This device complies with Part 15 of the FCC rules and Industry Canada license‐exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or change to this equipment.
