User's Guide

Basic Operations
and LED indicator Status
Wireless frequency
Bluetooth range
<10 m
iPhone 5
s and above with iOS
9.3 and above.
Android devices with Android
6.0 and above & Bluetooth 4.0,
thickness of less than 10.5 mm
and width of less than 86 mm.
Android
iOS
Supported
Devices
Specication
Dimensions
Ba
ttery capacity
Charging time
Working current
280mAh
1.5-2 hours
Working current <4 mA; Standby current <0.2 mA
T
urn
on/o
device
Bluetooth
Pairing
Normal
Mode
Reconnect
Low
Battery
Charging
Calibrate
joystick
Switch the power
button to the left.
LED indicator blinks
and gamepad
powers on.
LED indicator blinks
and gamepad
powers off.
LED indicator blinks
in blue and
gamepad enters the
pairing mode.
LED indicator stays
in blue when device
is connected.
LED indicator stays
in blue when device
is connected.
LED indicator blinks
in green slowly.
LED indicator blinks
in green quickly.
USB charging port is
connected to a
power source.
Charging is
completed.
Press and hold the
Logo and LB buttons
for 3 seconds when
device is on.
LED indicator blinks
in green twice after
the calibration is
completed.
LED indicator
stays in red.
LED indicator
turns off.
Switch the power
button to the right.
Power on the
device for the first
time.
Gamepad works
properly after the
pairing is
completed.
Paired devices
automatically
reconnect when
powered on.
Remaining power is
within 20% to 10%.
Remaining power is
less than 10%.
2402-2480MHz
83.25*82*36mm