User's Manual

Accessories Safety and TroubleshootingQuick start-up Control Panel Operations SMS Operations
Main Menu Sub Menu 1 Sub Menu 2 Sub Menu 3 Comments Note
SYSTEM SETTINGS RINGING TIMES <09> 
This function enables you to determine the number of times the control
panel will ring before taking your call (for control by phone call).
SYSTEM SETTINGS SIREN SETUP
WIRED SIREN
SIREN SWITCH
<ON OR OFF?>
Wired siren refers to a siren connected
to the control panel by wire.
ARM/DISARM TONE
<ON OR OFF?>
IN SIREN VOLUME 01 0=MUTE
SIREN ALERT TIME 3 MIN
Siren ringing time is calculated in minutes, default setting is 3
minutes. If you set the ringing time to 0, the siren will not ring out.
BUILTIN SIREN
SIREN SWITCH
<ON OR OFF?>
Built-in siren refers to the siren featured
in the control panel.
ARM/DISARM TONE
<ON OR OFF?>
WIRELESS SIREN
SIREN SWITCH
<ON OR OFF?>
Wireless siren refers to a siren
connected to the control panel by
radio-frequency.
ARM/DISARM TONE
<ON OR OFF?>
SYSTEM SETTINGS USER ID 4 DIGITS:0000 
More information on page 17 of this manual
This information is supplied by your CMS
center. After having stored the user ID, the
CMS center will be able to determine your
exact location according to your ID number.
SYSTEM SETTINGS
ARM UPLOAD ON / OFF  More information on page 17 of this manual
DISARM UPLOAD ON / OFF  More information on page 17 of this manual
SYSTEM SETTINGS CALL RECYCLE <09>
When the alarm is triggered, the control panel dials the numbers
you have stored. If you do not disarm the system, the control
panel will call you again (up to 9 times). The “Call Recycle” function
enables you to dene the number of times the control panel
attempts to call you.
SYSTEM SETTINGS BACKLIGHT TIME 030 S  Press “Enter” to adjust the time during which the LCD screen is lit. Backlight time can be set from 0 to 300 s
SYSTEM SETTINGS LANGUAGE   Change the language of the system.
Languages available may vary depending
on the version of your product.
SYSTEM SETTINGS RESET  
All system settings will be restored to default setting.
Stored phone numbers and connected accessories will be cleared.
SYSTEM SETTINGS ABOUT ABOUT JUN 4 2014
HISTORY - - -
Choose the event log you need to track, press “Enter”.
The control panel keeps in record the
latest 150 event logs.
15