Specifications

Figure 6 ASV1108 Connection view
3.2 WL501 board and ASV1108 Connection
4 Make connections to the ASV1108 board as shown in Figure 6 below. When FW
Updating or RF testing, connect a Micro-USB cable between computer and WL501 board
Micro-USB Port J6, other tests connect a Micro-USB cable to WL501 board Micro-USB
Port J85.
Figure 7
5 When the WL501 board is detected on USB, the USB devices needs to install the driver.
6 WL501 board Micro-USB Power interface description
When J57 pin1 and pin2 are connected by Jumper, Micro-USB Port J85 as a power
interface.