Specifications

Ehong Technology Co,.Ltd Confidential
//wait for handshake
//WLAN: 4 way handshake success for device=1
net 4 or 4 4
//wait for
//Net: DHCPv4c: IP=10.73.201.200 Subnet
Mask=255.255.254.0 Gateway=10.73.200.1
//Net: Resolving SNTP client...
//Net: Interface wlan1 initialized, DNS and SNTP started Successfully
o Use the following CLI commands to download and save AWS certs
Net cert get QCA4020_AIS_Thing1.pem.crt <ip-address> -s
client.bin -k QCA4020_AIS_Thing1.pri.key -t pem_cert
Net cert get root_ca.bin <ip-address> -s aws_ca_list.bin -t
ca_list
Net cert get ais_config.json <ip-address> -s
/spinor/ais_configuration.json -t raw_file
o Reboot the board and run the demo using the following CLI commands
o wlan enable or 3 5
wlan connect"WiFi Hotspot" ”password“ WPA2 CCMP CCMP
net 4
o Start AIS tasks
alexa ais_init or 5 4
alexa ais_run or 5 5
o You will see the following once the app registers to Alexa
> Resetting SYNA DSP
Resetting DSP Complete
Mute Button successfully registered
Wake Word interrupt registration successful
Wake up button registration successful
ais_client_id XXXXXX
Client ID already registered
Encryption key = 0xc9 ,0x53 ,0x39 ,0xxxxx
Shadow Initialization successful
Shadow Connection successful
Connection: 7763b63d-281a-5c4e-ccaa-xxxxxxxxxxxx
Connection ack: 0f7384fd-6fef-4c9b-a3a5-xxxxxxxxxxxx
Alexa Client is ready
When the application is run for the first time, it will ask the user to authenticate the
device on AWS and use AWS IoT services.
Please go to URL = https:// https://amazon.com/us/code