User's Guide

the machine support output data types, can be
set whether the output and output frequency. If
differential data needs to be output, it needs to
be set to self-starting base station mode, with an
external radio station typically with a Baud rate of
9600.
[Bluetooth] Data output Baud Rate, Differential
Data,RawData,HCPPPData,HRCData,GPGGA,GPGS
V,GPRMC,GPZDA,GPGST,GPVTG,GPGSA,respective
ly, the machine supports the output data type,
can be set whether the output and the output
frequency. If travel sub-data is required, it needs
to be set to self-starting base station mode.
[Radio] The differential data format of the built-in
radio transmission and the data forwarding
switch, sending differential data, need to be set to
the self-starting base station mode, the radio
module must be turned on power-up, set power
and frequency, etc.
7.Network
settings
Click the "Mobile
network" on the left side
of the page. You can
check:
 [Mail alarm]
 [HTTP]
 [HTTPS]
 [FTP service]
[Mail alarm]Contains three things: recipient
information, sender information, and message
alarm settings. Recipient information can be filled
in 1-3recipients, sender information, including
account number, password, and server address,
email alarm settings for receiver power-on mail
alarm, external power interruption mail alarm,
low battery level mail alarm, FTPpush failure mail
alarm, registration code expired or about to
expire (7 days in advance) mail alarm options
checked.
[HTTP]HTTP ports can be set to 80 by default and
not modified.
[HTTPS]HTTP channels are security-targeted, and
sensitive industry customers need to use this
feature to transfer data, set enable or port.
[FTP service] Set up a username and password。
8.Module
settings
Click the "WiFi network"
on the left side of the
page. You can check:
 [Summary]
 [WiFi settings]
 [Bluetooth
settings]
 [Radio settings]
[Summary] Contains WiFi and radio information.
WiFi information shows power status, WiFi mode,
MAC address, SSID, and radio information
includes station type, station power, air baud rate,
radio frequency, radio protocol, radio band,
frequency range.
[WiFi settings]Set WiFion, power on
automatically, WiFimode, SSID.