Users Manual

129
9.8 Upg rade ( S7 M o de )
The Upgrade mode provides a method to update the scale’s firmware version. This
function is usually performed by a service technician. The new firmware file may be
installed using a USB memory stick.
1.) Start at the norm al weigh mode
screen
2.) Press the Mode Key tw ice
3.) Press the num ber seven k ey
then press the X k ey
Note: This has the same results as pressing the
X key six times.
4.) Press the Pr int/* key
5.) Inser t the USB Memor y Stick
Ex.) Insert the USB memory stick
with the upgrade file.
Note: USB tri mark should be lit.