Users Manual

 3URJUDPPLQJ 6 0RGH (/3

 3/8 )LOH 6 0RGH

9.2 PLU File (S1 Mode)

The PLU File mode is used to program commodity or PLU information directly into the

scale. There are 3 different types of PLU’s available, Weigh Mode, Non Weigh Mode

and By Count Mode. Each of the different types contains information that is similar

such as name, price, expiration dates and ingredients. Each PLU type also contains

some information that is unique based on the PLU type selected. The programming of

each PLU type is explained separately in this section.

Note: Before entering any PLU information it is recommended to complete the

program min g of th e S Mode – S0 PLU Fields Visible. Th is w ill ensur e t hat all

of t he n ecessar y PLU Fields will be available dur ing th e process of

programming different types of PLU information.

9.2.1 Pr ogram ming a Weigh Mode PLU (S1 Mode)

In the example below the PLU Fields that will be used have been programmed

using the S Mode – PLU Fields Visible examples in the previous section.

Ex.) Create a Weigh Mode PLU for Ground Beef that has a Tare Weight of .05 lbs

and a Unit Price of $2.99/lb.

Not e: You m ay save th e inf ormat ion en ter ed at an y t ime and exit t his program by

pressing the SAVE key then the FEED/ESC key. You may also exit this

program w it hout savin g an y ent ered in form ation by pressing th e

FE ED/ESC ke y at any t i me.

1.) Start at the norm al weigh mode

screen

2.) Press the Mode Key tw ice