Users Manual


 3URJUDPPLQJ 6 0RGH (/3
 6HOHFWLQJ 3/8 )LHOGV 6 0RGH
60
10.) Select Label Format Field Status
0 = Not Visible
1 = Visible
Note: If SPEC 14 is > 0 the Label Format Field will
not be visible in S Mode – S1 PLU File
regardless of this setting.
Ex.) Make Label Format Field
visible by pressing the
number one key.
Press the Print/* key.
11.) Select Barcode Format Field
Status
0 = Not Visible
1 = Visible
Note: If SPEC 0 is = 1 the Barcode Format Field
will not be visible in S Mode – S1 PLU File
regardless of this setting.
Ex.) Make Barcode Format
Field visible by pressing the
number one key.
Press the Print/* key.