Installation Instructions

6
6DIHW\ 6XPPDU\ (/3
(ii)
If foreign objects (metal
fragments, water, and liquids)
enter the machine, first turn
off the power switch and
disconnect the power cord
from the outlet, and then
contact your Service
Representative. Continued
use of the machine in that
condition may cause fire or
electric shock.
When unplugging the power
cord, be sure to hold and pull
on the plug portion. Pulling
on the cord portion may cut
or expose the internal wires
and cause fire or electric
shock.
Ensure that the equipment is
properly grounded.
Extension cables should also
be grounded. Fire or electric
shock could occur on
improperly grounded
equipment.
Do Not remove covers, repair
or modify the machine by
yourself. You may be injured
by high voltage, very hot
parts or sharp edges inside
the machine.
CA UT I O
N
This symbol indicates t hat t her e is r isk of personal inju ry or
damage to objects if th e m achine is improperly h andled durin g
th is operation or action.
Precautions
The following precautions will help to ensure that this machine will continue to function correctly.
• Try to avoid locations that have the following adverse conditions:
• Temperatures out of the Specification • Direct Sunlight • High Humidity
• Shared Power Source • Excessive vibration • Dust/Gas
· Do Not subject the machine to sudden shocks.
· Do Not press the keys too hard. Keys will operate correctly if they are touched lightly.
· Clean the cover and keyboard, etc. by wiping with a dry cloth or a cloth soaked with detergent and
wrung out thoroughly. Never use thinner or other volatile solvent for cleaning.
· To ensure that the scale is operating correctly, place a known weight on the platter and check it for
correct weight measurement. This should be done every morning before starting normal operations.
· When moving the machine, take hold of the case and lift the machine. Never pick up the machine by
the remote display unit.
· Do Not place the machine on an unstable or slanted surface as the machine may drop or fall and cause
injury.
· Use only DB Scale approved thermal paper supplies. Do Not store thermal paper where it may be
exposed to direct sunlight, high temperatures, high humidity, dust or gas.
· Ensure that the scale is operated on a level surface.
· Any data stored in the machine may be lost or corrupted during a machine fault. Backup your critical
information on a regular basis.
· Try to avoid using the scale on the same power source as high voltage equipment or equipment likely
to cause mains interference.
· Unplug the machine whenever you are working inside it or cleaning it.
· Do Not block the ventilation slots of the scale as this will cause overheating which may cause damage
to the internal circuit boards or even fire.